What your platform already does
Your ovens bake and your platform controls them: programmes and recipes, alarms, eco modes and consumption, on the panel and in your cloud. All of it stays as it is, and stays yours.
Equipment makers
Your ovens and your platform carry out and measure: they bake, are controlled and report. BakeWise is the planning and business layer on top, for your customer: it decides what, how much and when to bake from demand, prices each bake at its real tariff and shows the result at the central plant and in every shop. It connects through your platform, and your panel, your app, your cloud and your brand stay in front of your customer.
Sample data from the BakeWise demo.
For equipment makers. Your ovens already bake: make them plan. What, how much and when to bake, at the lowest cost.
Connect: four ways to connect a machine. The page waits for its first message and confirms it as soon as it arrives.
Live: your machines and their state, on the bakery's wall screen too.
One oven: its chamber against the setpoint and every bake with its kWh and its euros. When it is slower to heat up, an alert gives the remaining life, and the alert becomes a work order.
Energy: the customer's tariff, hourly; the energy per unit, now or at the cheapest hour; the plan moves and the saving is given in euros a month; each hour's load against the contracted power.
Customer: bake what will sell, and every site compared in idle hours, alerts and stops.
An open layer: your machines carry out and measure; on top, BakeWise plans. Sparkplug B, Modbus, HTTP. Your ovens already bake; and a plan on top. Let's talk.
Today's bakes
| Time | Product | Oven | kWh | € energy | Reading |
|---|---|---|---|---|---|
| 05:10 | Rustic baguette | Deck oven 1 | 18.4 kWh | €2.21 | Measured |
| 06:00 | Butter croissant | Rack oven | 21.7 kWh | €2.60 | Measured |
| 06:40 | Wholemeal tin loaf | Deck oven 2 | 16.9 kWh | €2.03 | Measured |
Deck oven 2 takes longer to heat up
38 min, normally 29. Work order open: check the heating elements.
Your machines already measure temperature, consumption and cycles, and your platform already controls them, keeps their recipes and raises their alarms. What is missing, for your customer, is turning those readings into the day's decisions: how much to make, at what hour, at what cost and with what evidence.
Your ovens bake and your platform controls them: programmes and recipes, alarms, eco modes and consumption, on the panel and in your cloud. All of it stays as it is, and stays yours.
It takes what your machines already measure and crosses it with demand, the tariff and the plan: what, how much and when to bake, the cost of each bake, maintenance that gets ahead and the HACCP record. It reads from the machine; it sends it no programmes and no setpoints.
The result of its business with your ovens: the central plant's plan, the cost of each unit, the saving a month and every site compared. For the oven, your panel and your app; for the plan, BakeWise.
Each result is a page of the group demo, on its sample data.
Each shop's and each product's forecast sets the central plant's plan: the oven bakes what will sell, not what was made yesterday.
The measured kWh of each bake and its cost in euros at that hour's tariff, and what making N of a product costs now or at the cheapest hour.
With a time-of-use, indexed or PVPC tariff, the plan proposes moving the bakes of retarded doughs and the preheats to cheaper hours without missing the delivery time, with the saving in euros a day and a month.
Each hour's load of the plan against the contracted power, and the preheats it moves so it is not exceeded.
If an oven takes longer to heat up, an alert is raised, its remaining life is estimated and the alert becomes a work order.
Each cold room's designated probe writes itself into the temperature log, one reading an hour, and what leaves its limits alerts quality.
The plant's and the shops' machines, site by site: kWh a unit against the network's median, idle hours and alerts.
Does the machine's firmware have to change? In three of the four, no. If your ovens already have a platform, the natural one is the first: from your cloud to BakeWise.
If your machines already send data to your cloud, BakeWise reads it cloud to cloud: under an agreement between your platform and us, with your service's address, the access you issue for each customer and which datum each field is. The machine is not touched and your platform remains the one that runs it.
A meter on the machine or the bakery sends its readings over HTTP with an access key bound to that site. The machine is not touched.
A program on a PC at the bakery reads the machine on the local network over Modbus (TCP, RTU or RTU through a serial gateway) or HTTP JSON and sends it to BakeWise as Sparkplug B, over MQTT with TLS. The firmware is not touched: the machine only has to offer that data on its network. Modbus and HTTP have no authentication and travel in clear text: any host on that network can read them and forge readings, cold-chain temperatures included; keep the machines and the PC on a network only trusted hosts reach.
If your machine's controller speaks MQTT, it publishes Sparkplug B straight to BakeWise, over MQTT with TLS and with a credential of its own. This is the only way that needs a firmware change.
In development, not yet available: OPC UA in BakeWise Edge. Today, connect the machine over Modbus or HTTP, or through a gateway that offers one of them.
To agree with you; none of them is a product option today.
The layer offered to your customers under your name, beside your platform.
A price for each connected oven, alongside your connectivity service.
The layer included in the sale or renewal of the connected oven.
Your cloud, Sparkplug B, Modbus and HTTP, with no tie to any brand: your machine keeps its panel, your app and your cloud, and your brand stays in front of your customer. BakeWise adds the forecast, the plan and the cost on top.
SAP and SAP Ariba are trademarks or registered trademarks of SAP SE or its affiliates in Germany and in other countries. hioPOS, Solmicro, Square, DELMIA Ortems, Deliverect, CodySHOP, TraceGains and Trace One are trademarks of their respective owners; mentioning them indicates compatibility, not sponsorship. iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries and regions. Android is a trademark of Google LLC. Bluetooth is a registered trademark of Bluetooth SIG, Inc.
A guided tour for makers: the group demo as its owner, from the central plant to the shops, with what your oven brings and what the layer adds at each stop.
Open the group demo as Owner / CEOTell us how your machines and your platform communicate, and we will work out together how to bring their data into your customer's business.
Write to us